# float.h (0p)

# PROLOG

This manual page is part of the POSIX Programmer's Manual. The Linux implementation of this interface may differ (consult the corresponding Linux manual page for details of Linux behavior), or the interface may not be implemented on Linux.# NAME

float.h — floating types# SYNOPSIS

#include <float.h>

# DESCRIPTION

The functionality described on this reference page is aligned with the ISO C standard. Any conflict between the requirements described here and the ISO C standard is unintentional. This volume of POSIX.1‐2008 defers to the ISO C standard. The characteristics of floating types are defined in terms of a model that describes a representation of floating-point numbers and values that provide information about an implementation's floating-point arithmetic. The following parameters are used to define the model for each floating-point type:*s*- Sign (±1).

*b*- Base or radix of exponent representation (an integer >1).

*e*- Exponent (an integer between a minimum $e\_\mathrm{min}$ and a maximum $e\_\mathrm{max}$ ).

*p*- Precision (the number of base−
*b*digits in the significand).

- $f\_k$ " 6 Non-negative integers less than
*b*(the significand digits).

*x*is defined by the following model: $x=\mathrm{sb}^e\sum _{k=1}^{p}f\_kb^-k,e\_\mathrm{min}\le e\le e\_\mathrm{max}$ In addition to normalized floating-point numbers ( $f\_1$ >0 if

*x*≠0), floating types may be able to contain other kinds of floating-point numbers, such as subnormal floating-point numbers (

*x*≠0,

*e*= $e\_\mathrm{min}$ , $f\_1$ =0) and unnormalized floating-point numbers (

*x*≠0,

*e*> $e\_\mathrm{min}$ , $f\_1$ =0), and values that are not floating-point numbers, such as infinities and NaNs. A

*NaN*is an encoding signifying Not-a-Number. A

*quiet NaN*propagates through almost every arithmetic operation without raising a floating-point exception; a

*signaling NaN*generally raises a floating-point exception when occurring as an arithmetic operand. An implementation may give zero and non-numeric values, such as infinities and NaNs, a sign, or may leave them unsigned. Wherever such values are unsigned, any requirement in POSIX.1‐2008 to retrieve the sign shall produce an unspecified sign and any requirement to set the sign shall be ignored. The accuracy of the floating-point operations (

**'+'**,

**'−'**,

**'*'**,

**'/'**) and of the functions in

*<math.h>*and

*<complex.h>*that return floating-point results is implementation-defined, as is the accuracy of the conversion between floating-point internal representations and string representations performed by the functions in

*<stdio.h>*,

*<stdlib.h>*, and

*<wchar.h>*. The implementation may state that the accuracy is unknown. All integer values in the

*<float.h>*header, except FLT_ROUNDS, shall be constant expressions suitable for use in

**#if**preprocessing directives; all floating values shall be constant expressions. All except DECIMAL_DIG, FLT_EVAL_METHOD, FLT_RADIX, and FLT_ROUNDS have separate names for all three floating-point types. The floating-point model representation is provided for all values except FLT_EVAL_METHOD and FLT_ROUNDS. The rounding mode for floating-point addition is characterized by the implementation-defined value of FLT_ROUNDS:

- −1
- Indeterminable.

- 0
- Toward zero.

- 1
- To nearest.

- 2
- Toward positive infinity.

- 3
- Toward negative infinity.

- −1
- Indeterminable.

- 0
- Evaluate all operations and constants just to the range and precision of the type.

- 1
- Evaluate operations and constants of type
**float**and**double**to the range and precision of the**double**type; evaluate**long double**operations and constants to the range and precision of the**long double**type.

- 2
- Evaluate all operations and constants to the range and precision of the
**long double**type.

*<float.h>*header shall define the following values as constant expressions with implementation-defined values that are greater or equal in magnitude (absolute value) to those shown, with the same sign.

- *
- Radix of exponent representation,
*b*.

- FLT_RADIX
- 2

- *
- Number of base-FLT_RADIX digits in the floating-point significand,
*p*.

- FLT_MANT_DIG

- DBL_MANT_DIG

- LDBL_MANT_DIG

- *
- Number of decimal digits,
*n*, such that any floating-point number in the widest supported floating type with $p\_\mathrm{max}$ radix*b*digits can be rounded to a floating-point number with*n*decimal digits and back again without change to the value.

$\begin{array}{c}p\_\mathrm{max}\mathrm{log}\_10b\\ \u23081+p\_\mathrm{max}\mathrm{log}\_10b\u2309\end{array}\begin{array}{c}\mathrm{if}b\mathrm{is}a\mathrm{power}\mathrm{of}10\\ \mathrm{otherwise}\end{array}$

- DECIMAL_DIG
- 10

- *
- Number of decimal digits,
*q*, such that any floating-point number with*q*decimal digits can be rounded into a floating-point number with*p*radix*b*digits and back again without change to the*q*decimal digits.

$\begin{array}{c}p\mathrm{log}\_10b\\ \u230a(p-1)\mathrm{log}\_10b\u230b\end{array}\begin{array}{c}\mathrm{if}b\mathrm{is}a\mathrm{power}\mathrm{of}10\\ \mathrm{otherwise}\end{array}$

- FLT_DIG
- 6

- DBL_DIG
- 10

- LDBL_DIG
- 10

- *
- Minimum negative integer such that FLT_RADIX raised to that power minus 1 is a normalized floating-point number, $e\_\mathrm{min}$ .

- FLT_MIN_EXP

- DBL_MIN_EXP

- LDBL_MIN_EXP

- *
- Minimum negative integer such that 10 raised to that power is in the range of normalized floating-point numbers.

$\u2308\mathrm{log}\_10b^e\_\mathrm{min}^-1\u2309$

- FLT_MIN_10_EXP
- −37

- DBL_MIN_10_EXP
- −37

- LDBL_MIN_10_EXP
- −37

- *
- Maximum integer such that FLT_RADIX raised to that power minus 1 is a representable finite floating-point number, $e\_\mathrm{max}$ .

- FLT_MAX_EXP

- DBL_MAX_EXP

- LDBL_MAX_EXP

- *
- Maximum integer such that 10 raised to that power is in the range of representable finite floating-point numbers.

$\u230a\mathrm{log}\_10\left(\right(1-b^-p)b^e\_\mathrm{max})\u230b$

The - FLT_MAX_10_EXP
- +37

- DBL_MAX_10_EXP
- +37

- LDBL_MAX_10_EXP
- +37

*<float.h>*header shall define the following values as constant expressions with implementation-defined values that are greater than or equal to those shown:

- *
- Maximum representable finite floating-point number.

$(1-b^-p)b^e\_\mathrm{max}$

The - FLT_MAX
- 1E+37

- DBL_MAX
- 1E+37

- LDBL_MAX
- 1E+37

*<float.h>*header shall define the following values as constant expressions with implementation-defined (positive) values that are less than or equal to those shown:

- *
- The difference between 1 and the least value greater than 1 that is representable in the given floating-point type, $b^1-p$ .

- FLT_EPSILON
- 1E−5

- DBL_EPSILON
- 1E−9

- LDBL_EPSILON
- 1E−9

- *
- Minimum normalized positive floating-point number, $b^e\_\mathrm{min}^-1$ .

- FLT_MIN
- 1E−37

- DBL_MIN
- 1E−37

- LDBL_MIN
- 1E−37

*The following sections are informative.*

# APPLICATION USAGE

None.# RATIONALE

All known hardware floating-point formats satisfy the property that the exponent range is larger than the number of mantissa digits. The ISO C standard permits a floating-point format where this property is not true, such that the largest finite value would not be integral; however, it is unlikely that there will ever be hardware support for such a floating-point format, and it introduces boundary cases that portable programs should not have to be concerned with (for example, a non-integral DBL_MAX means that*ceil*() would have to worry about overflow). Therefore, this standard imposes an additional requirement that the largest representable finite value is integral.

# FUTURE DIRECTIONS

None.# SEE ALSO

*,*

**<complex.h>***,*

**<math.h>***,*

**<stdio.h>***,*

**<stdlib.h>**

**<wchar.h>**